ABRASIVE REMOVAL SYSTEM

Waterjet abrasive removal system

★Effect

After the water jet has been used for a long time, waste abrasives will accumulate in the water tank. When it reaches a certain level, we need to do the work of cleaning the waste sand, in the traditional abrasive removal, we have to stop the work of the cutting platform and do manual sand removal, Now, with the mobile abrasive removal system, we can remove abrasive without affecting normal cutting, and it is automatic abrasive removal.

★Features:

1.Effective and rapid cleaning of sediment in large water beds

2.When the water jet is in operation, the large-scale abrasive removal system operates automatically without affecting each other

3.The device can be installed within 10m of the waterjet

4.8 HP diaphragm pump provides powerful suction

5.The flow rate can reach 162L/min

6.Simple, cost-effective way to remove sand while reducing downtime

7.Get the ability to clean large water beds with limited footprint

8.Can effectively remove large and fine particles

9.The abrasive removal rate is more than 90%

10.During the entire abrasive removal process, the filtered water continues to be discharged into the water tank, and the water tank does not need to be replenished after abrasive removal

Comprehensive cost savings of more than RMB 50,000

• The process of sand removal does not affect the normal work of waterjet cutting

Put the adsorption sewage pipe of the sand removal equipment into the water tank of the cutting platform, and the abrasive removal and cutting can be carried out at the same time, which will not affect the normal work of waterjet cutting

• Simple operation and high sand removal efficiency

The operation of the abrasive removal system is very simple,

The first step is to push the sand removal system to a suitable position (the base of the abrasive removal system has moving wheels, which can be easily moved by one person without other auxiliary tools)

Step 2: Put the adsorption sewage pipe of the abrasive removal system into the water tank of the waterjet cutting platform, and put the return pipe into the water tank of the cutting platform

Step 3: Connect the power supply of the abrasive removal system

Step 4: Waiting to collect the filtered waste abrasive

Parameter: