Waterjet cutting machine use skills and maintenance methods
When the waterjet cutting machine is in use, we will find that the cutting machine cannot be used better if it is used for intermittent cutting. Only when the water jet cutting machine is used in continuous cutting, can the cutting be better. In this way, when cutting, we can make better use of the water jet cutting machine and improve the utilization of materials.
Therefore, when using a waterjet cutting machine, a continuous cutting method will be used, and then the corresponding workpiece will be loaded during cutting to achieve the continuous cutting effect. The lead-in and lead-out lines must be considered when cutting.
If it is necessary to adjust the lead-in and lead-out lines before cutting, then their positions must be adjusted.
Because we want to cut continuously, we should confirm the distance between the lead-in line and the lead-in line of the next workpiece. The shortest distance between them can be selected by setting the shortest distance between them. confirm. So as to achieve better continuous cutting effect
With the trend of increasing popularity of water cutting machines used in the industrial industry, the effective daily maintenance and maintenance can extend the time of use to effectively increase the cutting production output, so it is avoided in the process of use How to quickly repair without delaying the decline in production output?
1 If the water jet cutting machine is in use, it should be immediately reported to the manufacturer for maintenance, because only professional technicians can efficiently diagnose the fault and quickly solve the emergence of various faults and restore Normal working output.
2 During the use of the water cutting machine, it is necessary to avoid moisture and water leakage, so as to protect the cleaning effect of the movement in the operation.
3 In the process of daily use, the water cutting machine should be checked in advance, and if there is a fault, it should be updated and repaired immediately, so that the water cutting machine has a higher temperature value during processing.
4 When the water cutter is in a noisy mood, check whether there is oil leakage or water leakage in the tubing, and perform high-pressure removal of the failure in the oil pump to prevent the phenomenon of abnormal operation due to blockage
5 Lubricating oil should be regularly added to the nut of the increaser in the water cutting machine, which effectively prevents the phenomenon of paralysis and speeds up the work efficiency.
The waterjet cutting machine adopts the advantages of environmental protection and low process cost in the material cutting process, and increases the process flow of high-speed cutting in the processing equipment invested in equipment processing. It also prevents the laser technology from causing arcs on the material. In the case of traces, waterjet cutting can be carried out in the blueprint technology that has passed the design template to reduce the cost or the efficiency.